Omega Seamaster PloProf – The story of a legendary diving watch
When Omega presented the special collection "Summer Blue" for its Seamaster watches to mark the model's 75th anniversary, it also took the opportunity to show an entirely new version of its classic deep-sea diver the Seamaster PloProf. Eqotime tells the story of this legendary, extreme diver. "PloProf" is French and stands for "Plongeur Professionnel", which means "professional diver" in Swedish.
Text: Filip Ericsson
In connection with Omega presenting the special collection “Summer Blue” for its Seamaster watches on the occasion of the model's 75th anniversary, they also took the opportunity to show a completely new version of their classic deep diver, the Seamaster PloProf. Eqotime tells the story of this legendary, extreme diving watch.

“PloProf” is French and stands for “Plongeur Professionnel”, which means “professional diver” in Swedish. And that is exactly what pins down what Omega wanted to create when they began the project in the mid 60s: a diving watch intended solely for professional diving. That is to say people who dive in their profession.
Omega had been making professional diving watches since 1957 and around ten years later they decided to begin development of something considerably more extreme, the thoroughbred of the professional divers. A watch for “underwater contractors”, during the construction of for example oil rigs or cable laying at sea.
No shortcuts were accepted then, so to their aid they took the French deep diving company Comex as well as the famous underwater film maker Jaqcues Yves Cousteau, to assist with the development of the new wristwatch.
The Seamaster PloProf 600 was presented at the Basel fair in 1969 while the introduction on the market took place at the beginning of 1971. This first generation with the reference number 166.077 is today known as the Mark 1.


Monobloc instead of a helium valve
In order to withstand the enormous pressure that great depths subject a watch to, certain other extreme diving watches were equipped with a so called helium valve. The reason was that helium forces its way into the watch at these depths and needs a way out so that it is not damaged during the ascent. A form of the bends for watches.
Omega however chose another path and constructed a case that did not let in any helium at all, and could therefore skip the valve. This was achieved among other things through a case milled from one piece, a so called monobloc. All service therefore had to be carried out from above, by removing the crystal and the dial. Furthermore several layers of gaskets were installed inside the crown to make it helium tight there too.

Extreme shape dictated by function
The PloProf's to say the least special case shape was a consequence of the wilfully constructed bezel lock on the right hand side. The bezel, rotatable in order to work out how much time there is before the air runs out, is generally at risk on diving watches of being turned unintentionally if you knock into something.
Omega solved the problem with a substantial button that the user could easily reach thanks to its placement on the case. Pressed in, the bezel could be turned in both directions. This in turn meant that the crown had to be placed on the left hand side of the case, contrary to what was customary. The reason was that the diver was considered to have more frequent use of the bezel lock than of the crown while diving, which is why it got the crown's usual place on the right hand side.
The crown too was specially shaped, or rather the oversized crown guard around it. On the outside of the crown a square plate was fitted which together with the shape of the case completely enclosed it, and thereby created a full protection, a solution that had never been seen before.
The steel that the watch was made of was also of a special kind that was more corrosion resistant and more resistant to sea water than was customary. The current designation is 904L, that is to say the steel that Rolex (and a few others) use today. Omega was thus far ahead of Rolex here.
All this technology to create the world's best diving watch did however mean that the price of a PloProf 600 became twice as high as that of a Rolex Submariner.
The PloProf 600 was, as mentioned, intended for professional use far below the surface of the sea and was endowed dimensions that were hardly ideal for everyday use on land. Its construction resulted in asymmetrical case dimensions of a frightful 45x55mm as well as a fierce 15mm in thickness.

Movement off the standard shelf
Inside ticked Omega's own Caliber 1002 with automatic winding, date, 28 800 vibrations per minute as well as 42 hours of power reserve. The 1002 also powered other contemporary Omega models and the movement in the PloProf was thus hardly as interesting as the watch itself.
But just like most Omega movements from this time it was considered satisfactorily reliable and exact, a simple and well made movement that therefore did the trick even in an extreme instrument watch like the PloProf. Or particularly in such a one, perhaps one should say.
Unlike most other watches at this time the PloProf 600 had hardened mineral crystal instead of acrylic. The dial for its part stood out through its eye catching minute hand for the best legibility under water. The bracelet choices were rubber and two different steel bracelets, in traditional execution or so called “shark mesh”.
Three series (Mark 1, 2, 3) came and went during the roughly nine production years, where minor differences in bezel, hands and dial made up the changes. The model was discontinued in 1979. It should be added that a Seamaster PloProf 1000 was released the year after the PloProf 600, during 1972. That is however a completely different watch and thereby a story we will take another time.

Hard to buy vintage
The Ploprof 600 today has a devoted crowd of followers and the prices are relatively high. Because of the high retail price, and the extreme shape one has to assume, no large quantities were sold and the model is today without doubt one of the harder to buy vintage watches on the market.
You can nerd your way as deep as you like into the, for an uninitiated person, minimal differences between the three series, and finding an original watch that has the right dial, hands and movement is well nigh impossible. Things have been mixed freely during repairs and restorations over the years. For example the experts claim that 60 % of the watches have had their movements replaced. For someone not in the know it is impossible to tell.
We want to point you to the site www.omegaploprof.com with extremely much useful information.

Famous wearers
The PloProf's fame spread among the general public through it being worn by a couple of prominent figures back in the day. That the underwater researcher Jacques Yves Cousteau and his crew used it hardly comes as a surprise given their involvement in the development.
TV viewers could namely behold the brutal instrument on the film team's wrists outside their wetsuits in the TV series The Undersea World of Jacques Cousteau which was shown 1968-75.
A more unexpected wearer of this extreme diving watch was the legendary Fiat boss Gianni Agnelli, who sported his example outside his shirt sleeve, an undeniably eccentric trait that did however have the logical explanation that Agnelli suffered from a nickel allergy!
You yourself would surely look properly ridiculous if you slid around with a PloProf outside your shirt, but Agnelli undeniably possessed the gravitas and coolness factor that made it look marvellously right on him in particular. The undersigned's craving for an original PloProf has hardly been weakened by this curious PloProf anecdote either!

Epilogue
The PloProf 600 probably seems to many far too extreme for everyday wear. You can however argue that its dimensions have “shrunk” since the 1970s, when men's watches often measured as little as 34mm. In the light of a fashion for ever more swelling cases during the 90s and 00s, an old PloProf therefore no longe seems as extreme. A thickness of 15mm is for example not entirely unusual for a chronograph today.
Also notable is that the new PloProf 1200 that came out in 2009 is all the more brutal in its dimensions than the original watch, with 55x48mm in diameter as well as a full 17.5mm in height. There we have a considerably harder to wear watch that is also not as clean in its design. For the article author it is the original ref. 166.077 that applies.
The extreme design can on the other hand surely scare people away from an original PloProf too. The article author, just like Agnelli, is however of another opinion and is hugely sold on the PloProf's uncompromising industrial form.
There is something particularly attractive about the fact that the model's design has been governed exclusively by the function, entirely without regard for any ingratiation to please the eye. Notable, and remarkable, is then how good looking it actually turned out, in a singularly brutal way perhaps!
A PloProf 600 in original condition therefore adorns at least my top ten list of dream watches. I would proudly wear it at work now and then, though not on top of the shirt sleeve…
Pleasing for the PloProf enthusiasts out there is of course that a completely new version was as mentioned recently presented on the occasion of the Seamaster model's 75th anniversary, to begin with only in the anniversary variant “Summer Blue”.
Particularly refreshing is that they have returned to the somewhat more restrained dimensions of the 70s original, even if it is of course still a beast. A wet, brutal dream for 178 000 riksdaler. Read more about it in an earlier article here on Eqotime.

