The Timeline: News from Tag Heuer, MING & Panerai
This week's Tidslinjen moves between three very different parts of the watch world. TAG Heuer looks towards Japanese racing culture together with Team Ikuzawa and Bamford Watch Department. Ming lets the traditional Malaysian tin industry create an unusual, hand-hammered dial. Panerai meanwhile combines its classic military aesthetic with a modern and extremely light Carbotech case.
This week's Timeline moves between three very different parts of the watch world. TAG Heuer looks towards Japanese racing culture together with Team Ikuzawa and Bamford Watch Department. Ming lets the traditional Malaysian tin industry create an unusual, hand-hammered dial. Panerai meanwhile combines its classic military aesthetic with a modern and extremely light Carbotech case.

TAG Heuer Carrera Chronograph x Team Ikuzawa
The connection between TAG Heuer and motorsport hardly needs any longer introduction. From Jack Heuer's early collaborations with racing teams and drivers to today's visibility within Formula 1, the race track has been a central part of the brand's identity. The new Carrera Chronograph x Team Ikuzawa however takes a somewhat narrower and more personally coloured route through motorsport history.
Team Ikuzawa was founded by the Japanese racing driver Tetsu Ikuzawa, who during the 1960s and 1970s became one of the country's most prominent international drivers. Today the legacy is carried on by his daughter Mai Ikuzawa, who has built further on the team's graphic identity and its connection to Japanese car and design culture.
The new watch has been developed together with Bamford Watch Department and is according to TAG Heuer inspired by a Japanese Roadmaster stopwatch from the 1970s. The inspiration is seen above all in the clear black and white graphics, the bold printed indexes and the bright red details.
The base is TAG Heuer's modern Carrera Glassbox with a 39 millimetre case in steel. The construction lacks a traditional outer bezel and instead lets the strongly domed sapphire crystal ring extend over the dial's outer edge. The result is an unusually open dial with clear historical references, but without the model being experienced as a pure reproduction of an older Carrera.
The white dial has a discreet Clou de Paris pattern that gives the surface more structure than is at first obvious. Around the dial runs a black flange with a seconds scale, while the chronograph hand and the details in the register at three o'clock are lacquered red. The colour combination recurs in Team Ikuzawa's classic racing graphics and gives a fundamentally strict watch considerably more energy.
The date window is placed at six o'clock and follows the dial's slope towards the outer edge of the crystal. Above the date is Team Ikuzawa's name, while the rhodium-plated hands have been fitted with white Super-LumiNova.
On the back sits a sapphire crystal that shows the automatic manufacture calibre TH20-10. The movement works at a frequency of 4 Hz and offers a power reserve of 80 hours. The case measures 13,9 millimetres in height and is water resistant to 100 metres.
The watch is delivered on TAG Heuer's seven-row steel bracelet, but in the packaging there is also a white perforated leather strap with red stitching as well as a red and white textile strap. The box itself is designed with inspiration from a racing tool box and moreover contains a travel case and special Team Ikuzawa accessories.
TAG Heuer Carrera Chronograph x Team Ikuzawa, reference CBS221M.EB0435, is made in 150 individually numbered examples. The price is 10 450 euro.



Ming 37.06 Royal Selango
Ming has since the start in 2017 become known for a design language where advanced lighting, layered dials and floating indexes are often at the centre. With the new 37.06 Royal Selangor the brand however takes its starting point in a considerably older Malaysian craft.
The watch has been created together with Royal Selangor, one of the world's best known makers of objects in pewter – a tin-based alloy that also contains smaller amounts of copper and antimony. The company was founded in Kuala Lumpur in 1885 and still has its production in the Malaysian capital.
At the centre is the hand-hammered dial. Each dial is worked manually by Royal Selangor's craftsmen, which creates an irregular surface filled with small depressions. The structure catches the light differently depending on the angle and means that each example gets a somewhat individual expression.
The material is very unusual within the watch industry. Pewter has a softer and warmer grey tone than steel and develops a discreet patina over time. At the same time the alloy is relatively resistant to corrosion and discolouration.
The dial completely lacks a traditional logotype. Instead the Ming name and Royal Selangor's name are engraved on the back. The time scale is laser cut into the underside of the domed sapphire crystal and filled with blue-glowing Super-LumiNova X1. The same luminous compound is used on the hour and minute hands.
The hand-hammered dial is placed in Ming's characteristic 37 series case with the flared, almost pagoda-like lugs. Despite the model name the case measures 38 millimetres in diameter. It is 11,05 millimetres thick and has a lug-to-lug measurement of 44,73 millimetres.
The case is made in grade 2 titanium and has a completely brushed surface. Grade 2 is a very pure titanium alloy with high corrosion resistance, but the material is more troublesome to machine and polish than the grade 5 titanium that is often used within modern watchmaking. The raw, matte finish works particularly well here together with the dial's soft metallic tone.
The watch head weighs only 35,9 grams and the water resistance is 100 metres. Both the front and the back are protected by domed sapphire crystals with anti-reflective treatment on both sides.
On the inside works the Sellita for Ming SW300.M1, a specially adapted version of the automatic SW300-1. The movement has a power reserve of around 50 hours and has been fitted with skeletonised, rhodium-plated bridges, a special rotor and an anthracite-coloured baseplate.
The watch sits on a blue-grey goatskin strap from Jean Rousseau Paris. The packaging too has been given special attention: each example is delivered in a hand-hammered pewter box made by Royal Selangor.
The entire edition is assembled in Kuala Lumpur. It is the first time that Ming carries out the final assembly of a whole limited model locally in Malaysia, rather than in Switzerland.
Ming 37.06 Royal Selangor is made in 88 examples and costs 5 000 Swiss francs before tax. Sales began through selected Royal Selangor stores on 30 July, while a smaller number of examples are released via Ming's website on 6 August 2026.

Panerai Luminor Marina PAM01707
Panerai has in recent years made advanced materials an ever more important part of its modern model programme. Titanium, ceramic, BMG-Tech and various carbon fibre composites have been used to make the brand's large cases lighter and more resistant. Now the Luminor Marina family gets a new addition in the form of the PAM01707 with case, bezel and crown guard in Carbotech.
The silhouette is immediately familiar. The 44 millimetre cushion case, the powerful crown guard and the distinct sandwich dial mean that the model cannot be confused with very much else. At the same time the choice of material means that the watch is experienced completely differently on the wrist than the corresponding model in steel.
Carbotech is made by pressing long layers of carbon fibre together with PEEK, a high-performance polymer. The fibre direction changes between the layers and creates the irregular, wave-like patterns that are seen in the material's matte black surface. That also means that no case gets exactly the same structure.
The material is considerably lighter than both steel and titanium and has very good resistance to corrosion. Despite a diameter of 44 millimetres and a height of around 14,5 millimetres, the PAM01707 weighs only about 100 grams.
The black sandwich dial has a clearly historical character. The cut-out Arabic numerals and hour markers are filled with beige Super-LumiNova, which glows green in the dark. The combination with the brown leather strap gives the model a warmer and more vintage-like expression than many of Panerai's most recent Carbotech models.
The date display has been removed, which creates a cleaner and more symmetrical dial. At nine o'clock is the characteristic small seconds display. On Panerai's early military watches this filled a practical function by letting the diver check that the watch was still running.
Behind the closed case back in DLC-treated titanium works Panerai's automatic calibre P.9010. The movement consists of 200 components, works at a frequency of 28 800 vibrations per hour and offers three days of power reserve through two barrels connected in series.
The P.9010 also has a stop seconds and a local hour hand that can be adjusted forwards or backwards in one-hour steps without the minute hand or the movement's running being affected. That makes the function particularly useful when travelling between different time zones, even if there is no separate GMT hand.
The PAM01707 is water resistant to 300 metres. According to Panerai the case and gaskets undergo simulated long-term ageing before the finished watch is tested at a pressure that lies 25 per cent above the official rating.
The watch is delivered on a brown calfskin strap with beige stitching and a trapezoid buckle in DLC-treated titanium. A black rubber strap is included for use in and around water.
Panerai Luminor Marina PAM01707 is not limited and is available from August 2026. The European price is 15 200 euro.


